Hard cover bed fibreglass 6’installing from tacoma 3-gen to 4 gen

I have old cover bed fibreglass purchased from Leer used to be installed on tacoma trd sport 6 feet bed
My questions is can i install same cover bed my new tacoma 2025 trd sport 6 feet bed

 

I would double check the dimensions of the 4th gen vs 3rd gen bed. If I remember correctly they are different, so I don’t think that will fit unfortunately

 

Thank you
Looks like i have to make some adjustments maybe if its little bit smaller no big deal

 

I think the gen 4 bed may be too wide, measure them both or set it on there. It would be nice, because no one is making the hard 1 piece fiberglass anymore for the gen 4, I looked everywhere.
And the shape of it would fit over the little G4 tailgate spoiler too. The LEER is a really nice cap with good hardware, I would find a way ...
I had an old Snuglid off of my 1993 Dakota that was too wide. I sat it on my bed and marked where it hung over and cut the overhang and lips off.
I ended up with a bare flat piece of fiberglass and completely rebuilt it to fit.
I totaled the Dakota and had this lid sitting behind my shop for 30 years, couldn't give it away and was going to make a dog house roof or well cover.
It lives again!