4th Gen Tacoma 2024+ Suspension and Wheel Torque Specification

Hello,
I did a quick search and didn't see any of these posted for the 4g taco so I figured I'd share some useful torque spec information.

THESE ARE FOR REFERENCE ONLY!!!!

These values are not the same for every taco, they are all going to be very similar and in a lot of cases the exact same, BUT, there are variations and you must do your own homeworkand double check everything with the appropriate manual. YOU MUST also make sure your torque wrench is CALIBRATED or what's the point!

These were early production numbers so keep in mind that things change with time, updated values may be completely different. MAKE SURE you know what you are doing before messing with your suspension.

That being said...
There are 3 values for each item, they are in the following format... N*m (kgf*cm, ft.*lbf)
Hope this helps.

 

If anyone need any values added to this let me know we will do our best to add them

 

Is this software only accessible to Toyota technicians / subscribers?

 

Yes, it is a paid service.

 

Thank you for posting. In the very first diagram, the alignment cam bolts are labeled *1 and *2, but I can't find a torque value in the legend or in any other sheet.

Anyone know the torque values for these?

Also in that first diagram, the bolt (x2) shown at the very bottom of the diagram lists the ft/lb spec as 221. Is that correct? It's about double what the previous gen spec'd.

 

I’m not good with diagrams. Can someone point out the torque specs for the wheels only? Thanks.

 

Upper Control Arm Torque
(2025 TRD-Off Road Hybrid).. could be different for non-hybrid



Alignment nuts

 

See if this is easier