ReadyLift 1.5" Leveling Kit Install TRD-OR Hybrid

Haven't seen many users install a leveling kit on the hybrid yet so I thought I would share mine.

Factory Tires, Factory 18" wheels.
Measurements Before (From wheel Hub)

Driver Front: 23 1/4"
Passenger Front: 23 1/4"

Driver Rear: 25"
Passenger Rear: 25 1/2"

ReadyLift 1.5" Lift block Measurements After Alignment and 300 Miles

Driver Front: 24 3/4"
Passenger Front: 24 3/4"

Driver Rear: 24 3/4"
Passenger Rear: 25 1/4"

Not sure whats going on with the passenger rear... Could just still be breaking in idk..


Alignment was easy at the Toyota Dealership, my service center installs these lift blocks on a lot of 2024/2025s as a dealer addon.

Truck drives great, no change noticed. Hood looks much better while driving. I tow a 2000Lb trailer with two dirt bikes and it drops the rear about 1/2".. so really not noticeable.

If i was to do it again I probably would of just went with a 1" block so I could get a small amount of rake, but the studs would of probably been too short.

 

Thanks for posting this. Good information. I’m going to do a small 1”-2” lift soon and still deciding what to do. I have decided I definitely want a little rake tho even though I rarely tow anything