Unused connectors

@Wahhabm I have a 2024 Off-Road Hybrid also without the aux switches. How did you ended up wiring the switches? Looks really nice Thanks

 

What wires go where on the caliraised switches? I got mine installed but both blue lights come on and when I turn it off both lights go off.

 

Here you go. Yellow from tap a fuse. Cali raised didn't separate them so they both come on. I thought that is silly and I wanted them wired correctly by lighting the background and then when you switch them on, to get the additional one.

 

In my case the wire harness from the accessory is red white and black. My red wire is your white and my white wire is your blue. I got the nilight harness. I’m sure if I put the yellow on an existing wire when dash lights come on it’ll work.

 

OP, you want black on the dash illumination negative so it dims with the rest of the dash switches.

 

Which wire do I connect the black (harness/switch) wire to? The location for my switch is on my center console near the shifter.

 

So I attach the black wire to the purple or green wire?

 

Violet to switch black.
Green to switch yellow.
Black from aftermarket harness not used.

 

Revisiting this old thread. I am in a similar scenario as @Wahhabm. 4G TRD OF Hybrid, no Aux switches.

But upon inspection of the AJ1 - I have the wires. But alas, no aux harness in the footwell sidewall. To clarify - I do have the prewired sockets for the relays and I have the prewired auxiliary sockets throughout the vehicle.

Added note - Is the J92 connector, the connection needed for the switches?

That all said - What am I looking for? A socket connection for the switches? Those wires from the AJ1 have to go somewhere, no?

Thanks.

 

Damn... it seems I'm really close on this. Is J92 the connection point for the Aux Switch wiring?

 

I gave up myself.

 

hey ya'll sorry to revive a bit of an old thread that was pretty frustrating for others as well it seems, but I picked up a 25 SR5 and I have the relay terminals, no relays, all fuses, and appears to be all the wires in AJ1 but I cannot for the life of me locate the harness. the only thing I could find from underneath that had the same color connections for the aux switches were plugged into a silver box along the body. Not sure if anyone could help but thought I'd give it a shot. thanks guys

 

I recommend going to this thread. I am in process of trying to utilize the existing wiring to run switches to accessories.

https://www.tacomaworld.com/threads/riddle-me-this-auxiliary-wiring.861742/

So you are aware, there are 2 connections to find. AJ1 & J92. Wiring from both go to the switches. This appears to be the only issue. Either finding or running wires to both to then connect Aux switches and pigtails.

 

I gave up trying to hunt it down. They really messed up by not completing this. Why install the wires in the fuse box to begin with?