U-Joint replacements for front & rear driveshafts

I imagine I’m not first person to ask this question, I’m looking to replace all U-joints at the same time along with carrier bearing, I’d like to get moog U-joints the original ones have 180k on them and noticed a tiny little bit of play in the rear u joint so if you all can send a link to another thread or part #’s to all U joints for a 4wd 2nd gen. Thank you all

 

I'd go with OE or Spicer which is the OE manufacturer, Moog quality isn't what it used to be.

You can look up aftermarket parts on rock auto or OE parts on partsouq

https://www.rockauto.com/en/catalog/toyota

https://partsouq.com/

 

I like spicer too, I get discounts through moog so that’s the only reason why I picked them.

 

Run the “oem” Dana spicer u joints

I got these 5 years ago, and a cheap carrier bearing from Amazon

Toyota wanted $700 for everything

still going strong

$29 Spicer 5-213X U-Joint Kit 1330 Series (OSR)

https://www.amazon.com/dp/B00DOI8TQW

 

Is this U-joint for the rear driveshaft or the front driveshaft? Because they are 2 different sizes.

 

Mine was for the rear.

 

Okay thanks

 

I'd recommend sending the driveshaft (s) out to a driveline shop. They will install the U joints better than 99% of people can. The shop I've used typically installs Spicer U joints.

 

For toyota... it spicer only.. moog sucks nowadays..

 

Would anyone happen to know what the part number is for the 2 u joints on the front driveshaft? Looked online and can’t find anything from spicer.

 

$24 Spicer 5-153X U-Joint - Individual

Spicer 5-153X 07 tacoma
Spicer 211750
Oh wait.. thats the rear driveshaft... it should be the same tho..

 

The front driveshaft and rear driveshaft are different sizes.

 

Not be an ass.. but do a little searching.. eh?? I gave you part numbers for ujoints for the rear driveshaft and carrier bearing.. cause thats what you asked for in original post.. then you said front driveshaft.. so I dunno what you want.. I gave you what you asked for. Put the numbers in Google in see what they are

 

Front driveshaft only spins in 4wd... they shouldn't be bad

 

Well, not be an ass either but, in the description on this thread I quoted (all U-joints and carrier bearing) I edited the title to hopefully make my message clearer, didn’t mean to piss anyone off.

 

Fronts -

$21 Spicer 5-153X U-Joint Kit 1310 Series (OSR)

https://www.amazon.com/Spicer-5153X-5-153X-U-Joint-Kit/dp/B000CKN762
Though I will say most people don’t need to change the front U-Joints unless they are doing high speed off-road, or just plain off-roading in 4x a bunch.
Of course when I do mine I’m going to end up doing the front as well because, well why not.

 

Thanks I greatly appreciate it, I do use 4wd a ton plus they are 10 years old so I’d rather be safe than sorry.