Socal - 8.4 Rear Axle assembly $150

Socal - $150
Fontana Local Pick up only
Cash only

OEM Shock mounts were cut off and fabbed mounts were welded on to accomodate 12" 2.0 shocks

Axle is from a 2019 Tacoma.
Around 40000k miles
Axle has been removed for a couple of months, brake lines will need a good flushing or be replaced
Brake hardware is available to go with it

 

If you can't sell, i think ECGS will buy the third member for $175 and pay for shipping. But ask them too

 

This is not from 2019, correct? If so it would be a 3rd gen. What year actually? What is the reason it was removed? Any reason to think it is bent? Stock diff and gears in it?

Most importantly - what did you replace it with? Any build/install info? I'm looking for a stronger axle alternative, vs trying to beef up a stock axle housing

 

It came out of a 2019 automatic sport so as far as I know it should be the same as

$73 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)

2005-2015 non-offroad axles. I put it in this subforum since I thought at the time it might get more eyes on it. Thinking about it, it probably would have been better to put it in the 3rd gen forum...also in case there might be any part differences for the seals or the bearings so there isn't any confusion.
It still has the stock gears and diff.
Took it out because I put in a junk yard 8.75, everything on it was working fine, I swapped it out for a stronger diff and the factory elocker in the 8.75.

Ill probably request this thread to be closed and move it to the 3rd gen forum.

 

I'll look into that, thank you

 

I thought the 3rd gen axles have a larger diameter tube near the diff, and then slim down to the same size out near the end of the axles. I don't see that in the pics. Maybe that is only with the OFFROAD models that have a locking diff?

I'm actually looking for a 3rd gen axle that is larger and has the bigger diff, thought the sport and offroad versions would be the same look and feel, albeit different parts same as the 2nd gen. Any help here from you folks that know more than me?