1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2016 Tacoma Front Turn Signal Bulb

Discussion in '3rd Gen. Tacomas (2016-2023)' started by Judd2112, Aug 22, 2025.

  1. Aug 22, 2025 at 7:13 PM
    #1
    Judd2112

    Judd2112 [OP] Well-Known Member

    Joined:
    Jun 29, 2016
    Member:
    #190889
    Messages:
    48
    Gender:
    Male
    Vehicle:
    2016 Tacoma SR
    Today I replaced my front drivers side turn signal bulb in my 2016 Tacoma as it was out. After replacing with the correct model bulb I went to test and the blinker was still not working. When I put the DRL on, the bulb then does work but not as a turn signal. I took the other bulb since it was a 2 pack and put it in the Passenger side and that one works when I activate the turn signal. In addition both rear turn signal bulbs appear to be working. Any ideas on what could be causing the drivers side to only light up in DRL mode vs turn signal mode?
     

Products Discussed in

To Top