Airbags

Firestone Airbags going in tomorrow morning.

 

Got lift blocks in the rear? Bags are designed for stock spring height. May need spacers.
Single edged razor blade to cut the tubing square? Push on fittings are tough to get a seal without a perfect fit-up.
I blocked both my front wheels tight - and set the rear axle on jack stands - removed rear wheels and dropped the spare. That upper bracket is a knuckle buster if you have large hands.
Where do you plan to locate the fill valve or valves - if you use a single or isolate side for side?

Have fun! - Myself, I always forget something when I start these projects........

 

Yes. Lift blocks so don’t need spacers. Since the distance between the top of the leaf pack and frame has not changed. Have the new blades for cutting the lines. Yes to all the safety measures.

 

All done. About 3hrs. Will check over the next few days to make sure all is staying tight and nothing starts leaking. Was very please how will it went.