Icon rxt leaf pack

The TRD lift is done with blocks ? I didn't realize it was done with blocks. WOW! and folks pay more to Toyota for a lift with blocks than what they would pay for a lift with a quality lifted suspension that eliminates axle wrap.

 

Yeah, I realized that once it was out.

 

I have these leafs on option 3. Has anyone ever removed leafs to bring it down to option 2? I swapped my fiberglass shell for a GFC topper and lost 70lbs. The ride was already too stiff for my daily weight, and now it's even worse. Does anyone know other than U-bolts that need to be replaced if swapping from option 3 to 2?

 

I don't think other than removing the leaf you need to do anything. U-Bolts are a nice safety factor but other than that your set.

 

I thought there were 2 different center pins, one for option 1-2 and a longer one for option 3.
Before I put on my Icon RXT I reused the U bolts to install sumo springs and they held up fine. But I wouldn't reuse them more than one time personally.

 

Different center pins and rebound clips between 1/2 and 3...

 

Got some of these used, I am seeing the end of the leaves look very weird. Is this normal?
this is the end of the spring? Opposite the shackle.

 

its fine. the 2nd leaf in pack is just a little out of alignment

 

But it won’t cause any issues? Should I take them apart pack apart and realign it? Or it won’t make a difference?

 

If they are off the truck it'll take 5 minutes. clamp it, loosen the center pin and re-align them.

 

its fine as is but you can give them a smack with a hammer after bolting to frame before tightening u bolts if you want.

 

I tried the block in the rear with add a leaf from icon. Axle wrap bad. I changed over to the rxt leaf package from icon. What a difference. The rear end feels planted now. No hopping and less twist.