Anything welding

i'll find a sharp edge on some scrap metal, and run it against that, sort of like how one sharpens a lawn mower blade, just run the sanding disc so the sharp edge is cutting into the disc--kind of opposite how one makes a real sharp edge. it tends to cut past the gunk into fresh material

some of it is the right selection of disc. we have 60 and 120grit discs at work. the 120 gunk up if you stare at them too long. the 60 is more of a general purpose disc, but leaves a rough edge. so most times, i'll rough out things with the 60, and then touch them up with the 120 for a final finish.

at home, i use the hercules 36 grit flappers for roughing out. they're far more aggressive, and less prone to gunking up--- especially on my trailer project that has multiple layers of primer on it from re-coating it for outside storage between weekend work sessions

 

Thanks, I’ll give it a try! I stock up on those 36 grit hercs whenever they go on sale because they work so well, just hate throwing them away with so much meat on the bone!

 

Since it's been cooler weather out here, thought I'd enjoy being outside this week so I took care of tomorrow's work

Welded up the 20 tabs on this thing and it's done





Got some lag bolts on the way which will secure the wood to the top

Wood top could be finished by the end of the week

 

$8 8" x 1-1/2" x 1-1/2" Abrasive Cleaning Eraser Stick for Sanding Belts Sanding Discs Paper Skateboards - Natural Rubber Eraser Stick

https://www.amazon.com/Abrasive-Cleaning-Eraser-Sanding-Skateboards/dp/B0D6V96JFJ

 

I do bake stuff but i stole that pic off interwebs

 

Ordered, thank you!

 

Interesting, never seen one of those before