1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Spark Plug Change

Discussion in '5 Lug' started by CaliforniaTaco, Mar 10, 2011.

  1. Mar 10, 2011 at 1:16 PM
    #1
    CaliforniaTaco

    CaliforniaTaco [OP] Well-Known Member

    Joined:
    Apr 13, 2009
    Member:
    #15937
    Messages:
    61
    Gender:
    Male
  2. Apr 26, 2011 at 8:37 AM
    #2
    TacomaBuzz

    TacomaBuzz Well-Known Member

    Joined:
    Mar 7, 2010
    Member:
    #32764
    Messages:
    1,156
    Gender:
    Male
    First Name:
    Matt
    CT
    Vehicle:
    2014 RegCab 4x4 TX Special Edition
    Sirius, Bugflector,back-rack, stepsides.
  3. Apr 26, 2011 at 8:43 AM
    #3
    medic2230

    medic2230 @Koditten Pirate Radio member #002

    Joined:
    Oct 13, 2008
    Member:
    #9942
    Messages:
    63,981
    Gender:
    Male
    First Name:
    Murph
    Bama! Roll Tide
    Vehicle:
    2011 Taco 4x4 DCLB 2019 TRD PRO 4runner 2018 RAM 2500 mega cab
    20% Tint, OME 3"complete lift with Dakar's, Light Racing UCA's, 285/75/16 Nitto Terra Grapplers, 10 HP TW sticker, Ultraguage, B.A.M.F. Rock Sliders, MedicFab Bed Rack, Relentless front bumper, Air Flow Snorkel, Ham comms, Tech Deck
    Which engine? 3RZ? Or did they redesign the 2.7?
     
  4. Apr 26, 2011 at 6:09 PM
    #4
    MowTaco

    MowTaco Well-Known Member

    Joined:
    Sep 9, 2009
    Member:
    #22530
    Messages:
    3,817
    Gender:
    Male
    First Name:
    Matt
    Kansas
    Vehicle:
    16 Chevrolet Silverado
    There's a sticky for the 3rz in the 1st gen forum... I'm assuming the 2rz is about identical as well.
     
  5. Apr 26, 2011 at 6:37 PM
    #5
    afd23a

    afd23a Well-Known Member

    Joined:
    Sep 26, 2008
    Member:
    #9483
    Messages:
    1,832
    Gender:
    Male
    The Dynamo of Dixie
    Vehicle:
    05 Access Cab 5 Lugger
    Factory Fog Lights, Removed Secondary Air Filter, Metra Ipod Adapter, Int Wiper Stalk, Wet Okole's, URD Short Shifter, Scanguage II w/Blendmount, Fat Bob's 2.75" spacer lift, ARE topper, SP Performance Pads & Slotted Rotors, 4.10 gears
    It's pretty easy to change them on the 2tr-fe. Service manual calls for Denso SK20HR11 or NGK ILFR6C11. I used Denso's from the local dealer or rockauto.com, can't remember which.

    Disconnect battery.
    Remove the air intake tubing that goes between the throttle body and filter box.
    Unplug the coil pack closest to the front of the engine.
    Unscrew the retaining screw for the coil pack.
    Gently remove the coil pack.
    Use spark plug socket and ratchet extension to remove plug.
    Check gap on new plug. Service manual specs 0.039 to 0.043 in.
    Lightly coat the threads of the spark plug with anti-seize compound.
    Carefully install new plug. Be careful not to cross or strip the threads!
    Torque to 13 ft*lbs.
    Reinstall coil pack.
    Repeat for the other three plugs. Then reinstall the air intake.
     
  6. Jun 8, 2014 at 6:19 AM
    #6
    frastc

    frastc New Member

    Joined:
    Jun 7, 2014
    Member:
    #131478
    Messages:
    1
    Gender:
    Male
    First Name:
    Bill
    New Hampshire
    Vehicle:
    06 Tacoma
    Leer Cap, receiver hitch lots of window decals
    Ditto for 206 4cyl
     
  7. Jul 4, 2014 at 5:42 PM
    #7
    jackbower6864

    jackbower6864 Member

    Joined:
    Jul 4, 2014
    Member:
    #133290
    Messages:
    20
    Gender:
    Male
  8. Aug 23, 2014 at 4:12 AM
    #8
    SQU1D

    SQU1D Member

    Joined:
    Aug 2, 2014
    Member:
    #135243
    Messages:
    14
    Gender:
    Male
    NoVA
    Vehicle:
    06 2.7 Liter

    Just did it on my 2006 2.7

    It was much less complicated than I expected. I've never swapped spark plugs on anything other than my lawn mower until then and it still only took me about an hour and a half. I used the Haynes service manual as a reference as well as the V6 thread.

    That got me a sense of probably undeserved confidence which led me to swap the plugs on my wife's Nissan Murano. Boy was that different from my truck. That job took me about 6 hours.... no kidding.
     
  9. Aug 23, 2014 at 4:20 AM
    #9
    MQQSE

    MQQSE Bannable Galloot

    Joined:
    May 6, 2010
    Member:
    #36646
    Messages:
    50,737
    Gender:
    Male
    First Name:
    Rob III
    Palmer, Alaska
    Vehicle:
    "Stitch" Still Stock Concept Truck
    Shtuff
  10. Nov 7, 2014 at 5:34 PM
    #10
    95SLE

    95SLE Starting to get cold outside

    Joined:
    Aug 5, 2009
    Member:
    #20718
    Messages:
    12,206
    Gender:
    Male
    First Name:
    Tom
    Maryland
    Vehicle:
    09 RWD Access Cab
    Custom XM Install, Window Tint, Intermittant Wiper Install, AVS Bug Deflector, Bed Mat, TRS FX-R retrofits, CIBIE fog and spot lamps, PIAA 510 lamps, Acess LE cover, Weathertech Digital floorr mats, LED interior lighting, Pioneer AVH-2300BT HU, Boston Acoustics speakers, JL Audio Amp, shorty antenna, leather wrap steering wheel cover, Viper security system.

    :thumbsup:

    Doing a little research tonight Rob. I need brakes and rotors up front plus the rear wheel bearing, drivers side, needs to be replaced. At 73K on the clock this is my first real maintenance except for fluids.
     

Products Discussed in

To Top