BLHM finger print fix

Hey guys, just wanted to share this with everyone. Just finished a black headlight mod, and I think I'm good, I sealed the crap out of 'em so lets pray for no leaks! for those of you that have, or are planning to do this, here is a trick if you accidentally get a fingerprint in the lens and notice it after you re-seal: I finished mine and noticed 1 big fat finger smudge inside after i had sealed. I took a shish-kabob skewer (coat hanger or other would work) and wrapped a soft cloth or paper towel around the end (make sure you tape it securely so it doesn't fall off inside...Disaster!) and spay the glass cleaner of you choice on the end, stick it in the hole the bulb goes in and rub, take dry cloth and repeat if necessary! Voila! fixed. You can hit almost any spot on the lens if needed.

Hope this helps someone. You guys have helped me more than enough!

 

how did u seal it?

 

I just warmed em up and used the factory stuff still inter + a good bead if window and door silicone. Then I Hobbes it in every nook and cranny around the outside.