May have screwed up wiring

Pulled green wire with red stripe from white plug going into fuse panel under dash to disable DRL. Based on what I read in other threads, this should have disabled the DRLs. THEY STILL WORK Now, I don't know what may be disabled. Anybody got any idea what I may have disconnected?

 

Don't have my camera with me. Will take a photo tomorrow and post.

Thanks for taking time to reply.

 

this is the connector with the green wire/red stripe that was pulled. DRL's still operate. The connector is to the far right, vertical, under the horizontal connector. This same wire appears to go through the harness to the black DRL relay next to the fuse block. Sorry for not being able to add an arrow.

 

Got it resolved. Found the wire connector you described. I was not able to disconnect but could get to the black plug in the relay. Pulled the wire and got the results I was looking for. Put a sleeve on the wire and plugged everything back up. Also was able to repair the wire pulled by mistake on the other side of the fuse block.

Thanks so much for your help.