Will it fit?

a guy is selling a set of mickey thompson classic II rims, for 200 bucks. i wanna get them but i dont know if they will fit. they are 18x10s. the 10 in wide part is what worries me. can i fit em? even if i have to put some small wheel spacers?

 

somebody please!

 

whats the backspacing? offset?

 

watch out with the wheelspacers. I just went through the same thing. I got a set of Eagle Alloys real cheap. They stuck out way too far with my Spidertrax. Without the Spidertrax, they scraped the caliper on the front. So I had to go with a 1/4" wheelspacer. The wheelspacers are not hubcentric so you'll get vibration. I cut up finish nails to center them on the hub temporarily while mounting the wheel and minimized the vibration. Also, check the flange thickness. My new ones are 1/2" thick which didn't leave enough stud for safety so I ended up having to replace all the wheel studs with longer ones. For the wheels, it was worth the effort especially being the deal I got, but it took a lot to make it work.

 

Don't.

 

im running 16x12 classic 2's with a 1.5 inch spacer. they do fine as long as you have the right lug nuts. as long as you are ok with your tires sticking out i say go for it

 

im running 16x12 classic IIs also. with only a 1/4inch spacer and the lugs which are tapered. (they thread in deeper than normal)