About to start my mods on my truckk

okay so I'm ready to start my mods on my truck with having a full on ICON set up, Icon extended length CO's with resi's, Rear resi's with Dakar leaf packs and with tires I want to run 285/75/16R and rims 16x8 KMC enduro.

I know there is will be rubbing and i was wondering is there any good shops around Texas primarily South of Austin that will rim the truck or Chop cab mount i have a local shop but i dont know how well they are use to doing taco's

 

Might have better luck putting this in the BS thread.

 

alright thanks

 

Before you start chopping away make sure you have the right back spacing and clearance of the UCA. Chances are you will rubber on the front inner plastic piece and you can cut that yourself. I would drive around for little with the new tires so you can get your marks and go from there. It will sound terrible but it's not like you'll be driving like that for ever.