Bi-Xenon HID no low beam NEED HELP

Send them to live

 

send them where ?

 

I found these wiring harness diagrams helpful.

From Car HID Kits for AMP connectors. http://www.carhidkits.com/myfiles/image/hidkit/bixenoninstructions_2.jpg

The PDF is from TRS for DS2 connector. With the retrofit kit, you have the bare wires to stick into the connector. You may potentially swap the black & orange wires.

But without seeing or describing your kit & connectors, we're in the dark (almost literally, you have hi-s).

 

http://www.tacomaworld.com/forum/off-topic-discussion/38939-tw-live.html

 

Thanks for the additional info. Ill be trying this again in the next day or so...

 

Wow, i don't remember having that many grounds or a bi-xenon controller in my set up. But that makes me think, maybe his lows don't have a good ground connection. Make sure you check that as well as all the other connections.

I just checked. I was wrong. Not sure about the ground coming off the control box but definitely have a control box.