1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Ever Used A Rubber/Metal Drain Gasket?

Discussion in 'General Automotive' started by jeremy_283, Mar 4, 2012.

  1. Mar 4, 2012 at 12:03 AM
    #1
    jeremy_283

    jeremy_283 [OP] Super Member

    Joined:
    Dec 14, 2008
    Member:
    #11569
    Messages:
    1,432
    Vehicle:
    08 TRD Offroad Access Cab 4x4 Auto 4.0L
    Hella Rallye 4000 Cornering Lights PIAA 510 Fog Lights All Pro Front Bumper All Pro Rear Bumper All Pro Transfer Case Skid All Pro IFS Skid All Pro Rock Sliders All Pro High Clearance Hitch OME Dakar Leaf Springs OME Rear Shocks OME Front Shocks OME 885 Front Coils Wet Okole Seat Covers WeatherTech Floor Liners Sony Head Unit JL XD600/1 Amp 2 JL Audio 10” Subwoofers Custom Subwoofer Enclosure Kenwood Front Speakers Sony Rear Speakers Sound Deadening Mats LED Interior Lighting Pop N’ Lock Tailgate Lock Viper Alarm System Extra D-Rings In Truck Bed Maglite Seat Mount Disable Seatbelt Chime Rear Differential Breather Relocation Hi-Lift Bed Mount Flexible Front Mud Flaps 110v Inverter Always At 400w ABS Kill Switch Locking Center Console Removed Sway Bar
    I'm skeptical of them.... Any reviews?

    The autoparts store sold me one for my wife's car.

    ImageUploadedByTapatalk1330848187.771132.jpg
     
  2. Mar 4, 2012 at 10:20 AM
    #2
    Janster

    Janster Old & Forgetful

    Joined:
    Mar 25, 2007
    Member:
    #1138
    Messages:
    14,338
    Gender:
    Female
    First Name:
    Jandy
    Lancaster, PA
    Vehicle:
    2016 GMC Canyon SLT w/ LineX and....
    What's there to be skeptical about it?? I've never used one myself but that wouldn't stop me from using it.

    It looks like the one side is rubber and the other side is metal... Put the rubber side towards the pan and the metal side towards the bolt head and tighten.

    Check to make sure there are no leaks. Check again in a few days.

    Even if you discover a leak - it's probably only a few drops. You can wait until your next oil change to get rid of it and get something different.
     

Products Discussed in

To Top