Trade me a 2012 black grille for a chrome grille

I didn't take the bumper off, I just taped plastic over the tailgate and rear quarter panels. I did remove the black plastic step on the rear bumper, license plate, license plate light, and tow hookup thingy. The prep took only half an hour, and then I did a few coats!

I did the wheels following the instructions of a write up from this site. I did them a year and a half ago, so the write up is at least that old if you want to search for it. Just make sure you mark where the wheel weights were when you take them off! Also make sure you put a ton of effort into the prep (sanding, wet sanding every spot that will receive paint, a couple coats of primer, and a few coats of rustoleum hammer finish black.

good luck, and prepare to spend a full day doing this! post pics when you are done!