HID retrofits with LED strip

I got the mini H1s from TRS with the front facing LED strips. I've found the write ups on here for pulling the headlights apart and doing the retrofit but I'm unsure about the LEDs. I'm no electrician but I'm not retarded either (don't ask my wife).
Do I just drill a small hole in the back of the headlight when I have them apart and thread the LED cables through that. And if so what can I plug them into that runs the same power?

The site seems awesome and very helpful so far, I appreciate any help you can give me.

 

No need to drill, there will be plenty of room/holes for you to thread the leads for your LEDs through, however, I'm not sure of there power requirements though.