5 lug spacer lift

so after doing a good bit of research i found that the 5 lugs aren't prone to having a rougher ride after spacers, so i started looking for some and found some daystar poly spacers that are 1.5'' but i read on custom tacos that it only lifts .75''. is this true?
And are there any true 1.5'' or 2'' spacer lifts out there or should i go with a 1.5'' and v6 coils?
I've heard that the v6 coils when used on a truck that has a i4 in it will provide ~.5 to 1''. is this true?
truck is a 95.5 ac 2.4 5 lug

EDIT: i already have a spindle lift

 

bump

 

Fat Bobs sells 3" 5 lug lifts

 

i have doestch spindle on there but they only lifted it by 2-2.5, i wish i had done more looking and seen the fat bobs fabtech spindles cause from what ive heard they offer more true lift. thanks anyway

 

I was talking about the fat bobs spacer lift, which you could run in conjunction with the spindles.

 

i didnt see that on there website, link?

 

Bah, my bad, it's only 1.5"

http://4x4.fatbobsgarage.com/toyota...ear-add-a-leaf-2wd-1995-2004-5-lug-p8505.aspx

 

You wont like the ride quality with the spacer lift.

 

i'll probably go with the fat bobs spacer.
Will i need longer shocks on the front?

 

hopefully it'll be okay. Iv'e PM'ed a couple of 5 lugs that have spacers and they say that the ride didn't really change.
i guess cause the 5 and 6 lug springs are different.
if i had my way then i'd save up for the doetch coilover and uca, but its my dads work truck till he can find a good used tundra.

 

i dont offroad yet maybe when i finish school and get a job, so im not to worried about the reduced travel.
my trucks spring are really soft so hopefully it'll firm up just the right amount.
and thanks.
ps sweet looking truck you got