rear sits higher than the front.

so a while back i got a revtec 3 inch suspension lift installed and big surprise a couple years went by and my stock leaf springs wore out, so i took the blocks out and put 3 inch lift all pro springs in. now my rear end sits higher than my front. I think all i have are 2.5inch coil spacers in the front. is there anyway i can get the front up just a tad higher? im hoping for an easy fix but im pretty sure there isnt one. Also my taco is a first gen. i would appreciate any advice. thanks!

 

what's your hub/fender reading in the rear?

new leaf springs will give more than their rated lift until theyre broken in (usually)

 

Ditch the Revtek spacers and get some coils.

Konaborne has a point how new are the springs? They will eventually settle.

 

i figured they have already settled ive had them on for about a month and a half. or does it usually take longer?

 

khaos, would the coils instead of spacer get me up a little higher?

 

depending on what coil you get
my eibachs got me 3.5" lift initially

have you wheeled the leafs? that breaks em in a lot quicker than road driving

 

yeah they have been offroad quite a bit.

 

Mine sits a bit higher naturally until I put 240# of sand in for the winter.