2low mod

I'm looking for a way to switch the ADD so I can run 2wd Low Range

I've searched around on here and other forums but am having a hard time finding a good write up

http://www.tacomaworld.com/forum/1st-gen-tacomas/24001-2-low-mod.html

the link in here is no longer good

and i don't like the "unplug the harness" method

I'd like a setup that I could control with a dash switch.

Let me know who can help! thanks guys

 

well, i've comw accross this thread, seems as though it can't be done, bummer!

http://www.tacomaworld.com/forum/2nd-gen-tacomas/125288-2wd-low.html

 

Check this one out, and read through it all, as he made updates to use a single switch with DPDT relays.
http://www.tacomaworld.com/forum/2nd-gen-tacomas/195424-2wd-lo-mod.html

 

NICE ONE!!! thanks alot, i somehow never came across this thread!

thank you

 

If you follow the relay diagram, make sure you check what your relay diagram is like, either his was different than mine or he wrote the relay diagram wrong. I mentioned it at the end of the thread when I did that mod.

 

I read you posts in that thread, maybe I'll shoot you a message if i run in to troubles if you don't mind? It seems pretty straight forward I think

 

Yeah that would be fine. If you know a switch works and compare that to your relay diagram the schematic for the switches is right so it is pretty easy to figure it out for your relay.