Installing BT mic

Hi all,
I searched the topic, and see that most everyone prefers the mic to be at the top of the window near the mirror, or at least top of the driver's A pillar.

My question is, is there a simple way to get the wire from the back of my HU over to the bottom of the A pillar, without popping up the whole dash? Or will I have to disconnect the dash to run the wire over there. If so, can someone tell me where I'll have to unscrew or pop things out? I've had the radio out before, but never the dash.

Thanks!

 

It can be done but its very uncomfortable squeezing under the pedals and you still have to take off your a-pillar

 

This.

You can run the wire through the middle part of the dash down to underneath the steering wheel.

Then run it up close to the dead pedal. But like he said, you still need to take out the A pillar.