Front Wheel Bearing Installation HELP

All, thanks for all your good posts. You helped me change my rear drums last month. Tonight I'm working on the front wheel bearings. Its a shame my first post is asking for help, but sometimes you just gotta suck in your pride and ask for it.

I've looked at the diy posts with photos on Tacoworld, but they don't seem to resolve my issue.

Truck is a 2006 PreRunner.

Ordered Timken hub and wheel bearing assemblies under the impression that this would prevent me from needing a press. HOWEVER. I cannot get the hubs off of the stud assembly (incorrect terminology; see photo).

Part I got:


Old hub:


Does the old hub have to be pressed off? seems defeat the purpose of buying the bearing/hub assembly.

Thanks again for all your help.

Jake

 

yes needs to be pressed
that is not a hub that you bought that is a bearing assembly
this is a hub


and you will need seal as well

 

710477 is seal part # national

 

And even if you bought a new hub you will still need a press

 

Thanks for the help. I've got the seals. Guess I'll try again another day.