285/75 R16 Tires on 3in lift in front only stock height in rear, will it fit????

Hey guys i really want to get some new General Tire General Grabbers with raised red lettering but not sure if they will fit. Iv had some people tell me that as long as i have a 3 in lift in the front they will fit, others say no way. I need help, im running stock 16in rims without any back spacing and have hear they will rub on the UCA's...im getting new UCA's cause my are worn out, truck has over 275K, probably gonna go with Light Racing UCA's. Will the tires clear with those UCA's? and with 285/75 will there be any rubbing in the rear? I bottom out the truck a lot and has a particularly soft rear end. I plan on getting some 2.5 awayaway coilovers soon too. Let me know what you guys know thanks.

 

I think you'll be ok, use the search function though, there are thousands of threads on this.

 

Yeah, you'll be fine. I had 2 in the front and nothing in the back on my 33 12.50s. Shouldn't have an issue.

 

I need to be sure, i dont want to have to buy $1000 worth in tires for them not to fit, Thanks.

 

Search function.

 

Look man, unless you're running a 6 inch lift, from what I hear, you're going to need to trim for 33's. if you spent 5 minutes searching you'd have found that out. 265/75/16 is about the biggest you can run with slim to no rubbing.

 

I mean it will probably fit. You may rub a little bit, but its not like it cant be fixed. You should be good.