ARB bumper adjustment help (noise)

ive had my arb bumper on a month or so now, it looks great and i love it but people who put it on did good job yet didnt leave the said amount of space between bumper and fender. so when i hit bumps and holes it makes a noise mainy driver side. CAN ANYONE HELP ME BY HOW TO ADJUST IT ABOUT 10 mm. DO I HAVE TO TAKE WHOLE BUMPER OFF OR IS IT JUST A FEW BOLTS. HELP WOULD BE VERY APPRECIATED.

 

you dont need to use caps... and on the arbs i have installed there is no real adjustment that can be done maybe elongate the holes but that is it and that would mean removing the bumper.

 

you'll have to drill another hole on the two main bracket to drop the bumper a bit. i had to do it to my bumper as well

 

No you don't have to drop it. Just remove the fog lights and remove the 2 bolts that are used to lock the bumper in place . Then loosen the 3 bolts it has on each side and adjust it to the specs of 15-20 mm gap all the way around . Then tighten the 3 bolts and then re drill the locking bolts and you should be set . Seems harder than it is . I installed mine by my self and was not to bad . Good luck

 

ok i know what 3 bolts on the side you are talking about, there the ones that hold up that triangle looking brace. but for the 2 bolts that lock bumper in place. is that 2 on each side? i dont wanna take out wrong bolt.. thanks

 

Is yours a 2012/2013? I know the bumper is slightly different

 

its 2006

 

The two bolts should be right next to the 3 bolts maybe like a couple of inches back , unless who ever installed it didn't drill and put those bolts in . Mine is an 06 too so it's the same as yours .

 

If you want to pm me your number if your having trouble I can take a few pix and text them to you .