Have a question about lift and tire size.

Could I Clear 285/75/16's With bilstein 5100's in the front cranked too 2.5inches of lift with the stock rear? Would it require new rims or spaces? Vehicle is a stock 2010 Tacoma access cab trd

 

You are not going to want to put that much stress on your front coils. The coil is what is going the main lifting. Cranking your billys to 2.5 will cause alot of added stress to not only your CVs but as well as your carrier bearing. My advice would be to just purchase a set of billys all around, 2" eibach Coils and an AAL in rear. I got all that done under 500 bucks.

 

would the 2 inches clear those tires with out major trimming? I plan on eventually moving up to a full mid travel setup with tc uppers and king coil overs. But I don't have the $ for that now. But I need new tires. So I figured I'd use the 5100's to clear them till I have the money to do my suspension.

 

I think if you went with bilsteins and eibach coils in front and maybe some spacers you shouldnt have to trim, But im running Toytec/Eibach 3" lift with just an AAL in back and i get very faint rubbing on my UCA and outside lip... My best advice would be to save up and get a real kit instead of buying and selling and then buying again. Save you time hassle and worry