Fitting 285 75 r16s

Figured I show how I fit these new shoes on my truck. Body cab chop and a bit of fender trimming. Hubcentric spacers as well. Used a 2 inch spacer on the coils. Rear 2 inch block. The only issues I had was that the sway bar would contact the front spring under flex. I added a sway bar spacer and problem solved. Was able to align the truck to near specs and have some postive caster as well. Not all that bad and it really didnt cost much. Truck rides well and handles good. Added some over load helper springs to the rear which oddly stabilized the vehicle in turns and eliminated wheel hop. Carrier bearing drop eliminated drive shaft vibrations.