Is another 1/2 in. worth it?

I currently have 5100's and OME 885x up front with the 1/4 lean spacer, 11/2 AAL and 5100's out back and was looking to go a bit higher. The truck rides pretty nice now and handles the trails well but I was wondering if adding the 1/2 in spacers up front and the 2" aal be worth it? Would I even have enough threads left on the mounts up front to add that much?

My math which sucks since I hate math would be 3/4in on the drivers side and 1/2 in on the passenger front and 1/2 in both rears. It looks like I barely have enough threads left on the drivers side as it stands...

Anyone have this setup?

 

I have 5100's / OME 885X with the Toytec Top Plate Spacer Kit (1/2''). The kit comes with extended studs to replace the factory (3) studs on each side.

I am fairly level with this setup and the stock 4 leaf in the rear and 1.5'' Toytec AAL. Keep in mind I have a plate bumper, IFS skid, and sliders, so that may affect some height differences.

Matt

 

Ahhh, I didn't know they came with studs.