URD Throw Out Bearing - new clutch too?

Im doing the URD throw out bearing myself to cure the squeaking stock bearing. Was wondering if I should change the clutch / pressure plate too? I have an 07 access cab with 50K miles. I just saw the post from gnyla who just turned 300K on the original clutch! Based on that, im leaning toward not touching the clutch.


Whats your take?

 

You probably don't need to touch the clutch/pressure plate at only 50K. I did the URD and clutch/pressure plate on my 06 at about 130K, and I think there was plenty left on the original clutch.