Specific suspension question???

Ok so I have a 07 sbdc 4x4. I dont have the tsb leaves and my truck is totally stock from the suspension side. I would like to lift about two inches without replacing uca's, keeping it level and be able to fit at least a pretty meaty 32 if not 33. My truck has right at 100k so are my leaves and coil springs still ok to just add a aal and maybe 5100's? 95% of the time it will be on the street as my daily driver but every now and then I go wheeling. I have read tons of threads on here but I want to know what I specifically need and should get. Thanks guys!

 

Nobody? Come on guys!

 

I have an '07 with 100k also. Dcsb, prerunner, non tsb springs.. I went with 5100's all around, set the front at 1.75. For the rear I went with icon AAL. Overall I got just shy if 2" of lift and it's pretty close to level. It rides great. I don't do any crazy wheeling though

 

Good to hear that the factory springs are still good. Have any pics by chance? Thanks for the response.

 

Looks good! Thanks

 

I like the XD addicts a lot, i like that you blacked out the hella covers too, I might have to look into the icon aal

 

Take a look at my build. Did exactly what you're wanting to do.

 

Very nice looking truck

 

i have 5100's set at 2.5 and stock in the rear i fit 285/70r17 with no rubbing and no trimming a one and a half to two inch block in the rear would probably make it sit level but the 5100's are night and day better than stock on and offroad.

 

Thanks!

 

Nice rig! I really want to go OME but am debating on the 5100/Eibach which is quite a bit cheaper. Decisions decisions!

 

That lift setup will get you about 2.5" and little bit stiffer ride. I considered it pretty heavily.

 

I def dont want a stiff ride with a two year old in the back. Looks like Ill be going OME