no power at dome light

Dome light stoped working its not the bulb or fuse. I'm not geting any power at the dome light or fuse any ideas.

 

subbed to thread. Having same issue. Checked with multimeter and its getting no power. no cuts in wires or anything weird. fuses all good.

 

I did swap too a led bulb but it worked fine for about 6 months till now. Wires from fuse too bulb good no brakes in it also. No power at the bulb so I checked the fuse its good. Checked tor power at the fuse still nothing. Just not sure were to check next. Any one got a wiring diagram.

 

i had this problem a while back too. i ended up taking the map lights apart which is where the dome light is fed from and didnt see anything, put it back together and it worked. must have been a bad connection i guess?

 

fixed it...ok so the no power at the fuse was my fault i wasn't getting good contact with my DMM... the problem was in the dome light at the switch one of the prongs that touches the bulb didnt have a good connection. the little rivet connection was broken.