Keyless Entry Question???

Goodevening gentlemen,
I recently purchased a keyless entry kit off eBay. Yes I know Chinese cheap but it was only $15. Long story short I have everything wired in except the wire that goes to the turn signals (or indicator light). (I will be doing a full write up soon) Here is my question, the directions show a brown wire going out, connecting to an X with a circle around it, and then going to ground. Directional light is written above the circle and the X. This unit has no internal relay for light flashers and thus uses the one on the car. I have looked at numerous wiring diagrams and have narrowed it down to this. I need to find the wire that connects the hazard switch to the flasher relay. My Chiltons manual shows it as a green wire. If I can find this, both lights will flash at once like newer cars, and life will be good. I have the fuse panel out and I can see the flasher relay, and access behind the panel. If anyone can give me a wiring diagram of the rear of that panel, and/or give me some more information on how the relay works it would be much much appreciated!! I'll post the directions that came with the kit tomorrow.
-Rex