Lift and bumper???

I am thinking on this lift for my 2013 dblcb 4x4.


Front coil options: 885 Coils
Front top plate spacers: NO top plate spacers
Assemble front shocks/coils with new bushings: NO
Front diff drop kit : Yes (for 4x4 models)
Rear lift: Complete Dakar OME CS047R springs with u bolts - $469.00
Add rear shock stone guards: YES - $26.00

I would like to run 275/70/16's, and add a demello offroad front bumper and winch.
Would I really need UCA's with this? I was going to go with just the billstein shocks but was not sure with adding the bumpers front and rear if that would hold up? Would be mostly on road with occasional logging roads. Any tips or pointers would help, I have read a lot here but it can get a little confusing.

 

If you plan on adding a front bumper and winch you might wanna look at the 886x coils.
I'd also get the top plate to correct the taco lean as well.
Also the diff drop is not needed on 2nd gens so don't order it.

Ucas are pretty much a must with the OME kit since it's a full 3 inch lift. Overall good choices, also don't forget extended rear brake lines