1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Internal USB cable for 2013 Tacoma

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Magna2406, Oct 22, 2013.

  1. Oct 22, 2013 at 7:33 PM
    #1
    Magna2406

    Magna2406 [OP] Member

    Joined:
    Oct 21, 2013
    Member:
    #114962
    Messages:
    20
    Gender:
    Male
    Vehicle:
    PreRunner
    I need to find the internal USB cable that goes from the back of the 2013 Toyota Tacoma 6.1" Touchscreen stereo (Model 86140-04080) to the back of the USB port on the dashboard. The cable would need to have a male square USB plug for the back of the stereo and a MX39 series male connector for the back of the USB port. Anyone know a part number or vendor? The Axxess vendor cables have the male square USB plug on their cables, but apparently not with the MX39 series connector on the other end.
     
  2. Oct 22, 2013 at 7:36 PM
    #2
    Magna2406

    Magna2406 [OP] Member

    Joined:
    Oct 21, 2013
    Member:
    #114962
    Messages:
    20
    Gender:
    Male
    Vehicle:
    PreRunner
    A cable with male MX39 series connectors on both ends might work too. Again, anyone know of a part number?
     
  3. Oct 23, 2013 at 7:59 AM
    #3
    TacoAlaMode

    TacoAlaMode Mr. Midlife Crisis

    Joined:
    Mar 4, 2010
    Member:
    #32558
    Messages:
    4,439
    Gender:
    Male
    First Name:
    Brian
    Huntsville AL
    Vehicle:
    10 DC LB MG 4X4 TRD Sport
    Icon Ext Coilover, Alcan Rear springs, Demello 3-Hoop Bumper and RockCrusher Sliders, Full tint 360', WeatherTech Floor liners and rainguards, Debadged, In Cabin 110 with 400w anytime, Diff breather mod
    I did a quick search on monoprice.com and didn't find MX39 connectors, but you could always give them a call. If they don't have them but know where you could find them, they may give you that information.
     
  4. Jan 24, 2015 at 7:55 AM
    #4
    chevellian

    chevellian New Member

    Joined:
    Jul 2, 2014
    Member:
    #133145
    Messages:
    2
    Gender:
    Male
    First Name:
    Alfredo
    La Paz Mexico
    Vehicle:
    12 PreRunner TRD
    Hello, why do you need this cable? I just upgraded from the base stereo (2012) to a 2013 touch screen (86140-04080) and had to get the 20/28 pin harness for wheel controls and mic to work, now I have my USB port (dashboard) doesn't play music from USB stick or iPhone, just charges the phone, I was thinking maybe I need another harness for USB to work? Maybe this is your case too
     
  5. Mar 7, 2015 at 1:32 PM
    #5
    bellot8670

    bellot8670 Active Member

    Joined:
    Aug 1, 2012
    Member:
    #83874
    Messages:
    36
    Gender:
    Male
    First Name:
    Steven
    Mt Sterling KY
    Vehicle:
    2012 Tacoma SR5 double cab 4x4
    I don't know if you've found a solution yet but i purchased a cable off of eBay that directly plugs into the back of the radio and then plugged my iPhone charger into it and ran it out of the slot next to my stock usb/aux connector is. theres been a few threads on modifying the back of our stock usb connectors and the end of the cable but I'm not that confident in messing with it. here's a couple links to what i bought to make it work.
    http://www.ebay.com/itm/AUX-USB-Cab...fits=Model:Tacoma&hash=item3390c46024&vxp=mtr
    http://www.ebay.com/itm/281220545629?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
     
    This site contains affiliate links for which the site may be compensated.
    #5

Products Discussed in

To Top