2012 Fog Light Kit

I want to add fog lights to a 2012 Base V6. I saw the wiring behind the dash and the contacts in the fuse box. Does anyone have a picture of where wiring is under the bumper?

I found the kit below and want to make sure I can just toss the harness it comes with and just use the switch, relay, and fog lights. That's all I need right? No extra fuse or anything? Thanks for the help yall...just joined because I learned I might not need to rewire to add fog lights. All the information posted thus far has been really helpful! Thanks!

Fog Lights / Lamps Kit OEM Replacement for Toyota Tacoma (FL-TY090-AC3)

http://www.amazon.com/Lights-Replac...395&sr=8-1&keywords=fog+light+kit+tacoma+2012

 

From what I have seen, many of the trucks in 2012 were prewired. The wires for the fog lights are taped up inside the bumper only inches away behind where the fog light goes. The wire plugs directly into the bulbs.

Personally, all I needed was the housing for the bulbs, the bubs themselves, a relay, and a switch. Did not need any extra wiring.

The kit you found seems to have everything you need and then some.

Only problem is that the housings may need a little convincing to fit into place but it will work.

Good luck