new front rims rub brakes

My new front rims rub my brakes without spacers but the rims are deep dish so they stick out without spacers I don't want my tires to stick out too far and the rims were free any ideas on what I can do and pics would ve appreciated

 

Replace those junk rims (you get what you pay for), and replace them with ones that actually fit.

 

Are you really a 2nd gen 5 lug?

You will likely get better feedback if you post your question in the 2nd gen section.

 

I see vibration problems with those rims as well . Anytime the backspacing is changed , the wheel is moved away from the rotor changing the original geometry of the front end .
If the wheel sticks out past the fender you put a high stress factor on the front end components .A set of wider fender flares will help your paint .
Best bet is to sell the rims.

 

Need to know which rims you got. If they're only rubbing slightly (like most steel 'D-window' rims with low back-spacking do) you can grind the caliper to allow clearance. Look up that mod. But first, take pictures and post them.

 

^^^^^^

 

Aftermarket wheels are usually reversed barrels which means the center of the barrel hangs down lower and are notorious for hitting Tacoma calipers. If its a Gen2 truck then you usually need to go with at least a 17" to clear the calipers or find yourself a non reversed barrel which is really hard to find in an aftermarket wheel. We need more info, you need to tell us what you have? Which diameter, what width, the offset; year of your Tacoma, etc.