2 inch suspension lift

I was interested in getting a two inch suspension lift for my Tacoma. Is it necessary to replace wheels/tires? Should lift be done on all four tires? I mainly want the look for my Tacoma. Any suggestions would be helpful.

 

You should spend some time searching and reading...but I will give you some basics.

No, it is not necessary to replace the wheels and tires on your truck after a lift. Get an alignment yes but replace no. A lift will accommodate larger wheels and tires but a stock truck may not fit them as well depending on how big you want to go.

If you get a lift, it isn't for individual tires. You can either lift the front, the back or both. If you only lift the front you will get some serious bro lean. If you lift only the back you will have a rake. Most people will usually do both at the same time.

Best of luck

 

I'm not entirely sure what you mean by a lift being done on all four tires...

Do research. Then do some reading, followed by some research and reading. I spent hours planning my build. I have a two inch lift and you can check it out in my build below...