4 inch lift kit?

does any one know a good 4 inch lift kit for an 09 tacoma 4x4 double cab trd off road

 

RCD Suspension makes a pretty sweet one!

 

Your best option would be the Camburg Spindles but you wouldn't be able to run them because you have a 4x4.

 

So.....this appears to be the best option then. But yes if you have a prerunner the spindles are pimp shit.

 

X1, get the Total Chaos or Camburg spindles.

 

Spindles FTW!

 

will you be straight if you just put the spindles on a stock suspension?

 

if your talking about alignment then yes you will need one. spindles are suppose to keep your stock configuration so you won't be needing UCA's

 

You all just answered my questions. Camburg here i come!

 

no, i mean is it alright to put the spindles on a stock suspension without having to change anything else?

 

As a note to the OP the RCD 4 inch lift will not work on your 4x4 if you have the VSC option. Last I checked with RCD they had not fixed this problem. It causes the onboard computer to freak out. I would verify that the VSC controls do not interfer, as they were testing it again a few months ago.

I installed Camburg Coil overs and UCAs and I was able to dial it up to 4 inches on my 09 though with no problems and my CV joints are not at extreme angles either.

Good luck with your choice.