2012 TX Baja rear TRD shocks keep going bad

You need a hug. Maybe one of these other fools here can give you one. A bro hug among fools . . . . ..

 

Good luck op, too bad this douchbag ruined your thread.

 

Calling Chris...

 

Somebody got their Cheerios pissed in apparently...

 

the new factory springs are pathetic.. my brother in law has an '05 sr5 prerunner and his springs are way better than my '13 4x4 OR.. he can haul more in the back of his truck than i could even attempt..

they are flatter than they are supposed to be.. the 2nd time i took mine in for flat springs the dealer kept saying, its normal for them to be that flat because they didnt want to swap them out again.. when i put my all pro springs on it lifted 4.5"s when it was only supposed to go up 3 inches.. my truck used to bottom out with less than 500 lbs. in the bed.. I couldnt even keep my tools in the bed of my truck if i wanted to haul anything at all

 

As you can see from my pic, the truck does not sag in the rear. I don't know what more I can say. It's obvious. And I haven't blown out any of the rear Bilstein 5160's. You can see the trailer I've been hauling, you've had the specs on it, and once I unhitch it, the springs and shocks are fine.


That's about all there is to it for this thread.

 

Sure, punk, I derailed a thread that was full of BS from the start. Right. Only an idiot (you and others, apparently) would think the truck was sagging from the Op's pics. And, being the punk idiot you are, you carried on from there.


This one punk, CorrosiveTendency, also thought I had a TX/Baja truck and ran his mouth about that, making a fool out of himself. This punk ran his mouth without knowing the facts. Keep your mouth shut, punk.