Help finding speciality bolt

I have been unable to use my tonneau cover due to couple of the bolts that hold the crossbars in place snapped off.. Its a Lebra low profile tonneau and they are longer made and the company that now owns lebra has no parts or info available..

I only have one picture of the parts... well its actually two side by side..

from what I can tell I think its some kind of Tee bolt. Id go remove one totally off the truck but its still buried in a snowbank and Im still trying to remove it.

If anyone an identify what it is and help point me in the right direction I would greatly appreciate it.

 

I have tried looking a some specialty nuts/bolts/screws and interestingly enough, Ace Hardware has been a successful place for me.

 

if its only the bolt,it looks metric(i would say 6mm is the standard size for stuff like that,if american,its 1/4 inch)
,its a socket head cap screw(shcs),
look at fastenal.com,
msc.com,
mcmastercarr.com

they might also have the t nut,
if not,try a local fab shop

 

the bolt its self Im not worried about its the part that slides in the slot ive had a hard time with..

 

It's hard to find two nuts welded to the same plate as off-the-shelf hardware. However, if you can deal with the two nuts being separate, then standard "weld nuts" can be ordered from McMaster-Carr or Fastenal.



http://www.mcmaster.com/#weld-nuts/=q3w7q6 (scroll to bottom)
http://www.fastenal.com/web/products/fasteners/nuts/weld-nuts/_/Navigation?term=&termca=&termpx=&sortby=webrank&sortdir=descending&searchmode=productSearch&zipcode=&filterByStore=&filterByVendingMachine=&r=~|categoryl1:%22600000%20Fasteners%22|~%20~|categoryl2:%22600072%20Nuts%22|~%20~|categoryl3:%22600123%20Weld%20Nuts%22|~

 

well no luck at ace or napa.. I did find out its a 8/32

I was able to mangle another one off....

 

does this look right?

http://www.mcmaster.com/#90594a009/=q3x01z

 

The tab-base version looks like it might work:
http://www.mcmaster.com/#90594a009/=q3x0ak

 

emailed a few places... most only deal in bulk

 

Does the McMaster part 90594A009 fit based on your measurements? It's only $7 for a pack of 50.

 

Looks to be the right spec. Have a email out to them too

 

got the tee nuts in, Just have to coat them with some paint and put it together... so heres a pic of the original and the new one...

 

well, its back together, now I remember why I was looking at new ones... Its quite the bear to get back on...

 

love the low profile look though...