Air fuel mods help 3.4 tacoma

Does anyone know of more air/fuel mods for a stock 3.4 v6 tacoma?

What I have down
- headers ( port/polish )
- full exhaust
- k&n intake

Is there anything else I can do/add?

I tried searching the forum but came up with nothing

 

What are you looking to accomplish first of all? If more power and you have a good amount of money I'd go turbo set up.

 

I'm in the waiting for a modded CXRacing turbo kit but for now I just want more air/fuel mods other than a supercharger or turbo.
No forces induction
Just free up everything

 

I'm not sure you understand what a port and polish is.

Whatever you're looking for (power, MPG, etc)...you'll probably get better results from a tune-up and/or replacing worn engine parts than any and all bolt-on "mods" combined.

The typical "this-will-gain-you-20-horsepower" intake, headers, and exhaust, will not in fact get you any gains. You may possibly be able to get a few horsepower (like 2-3) from a re-tune. You can add bolt-on mods, then get your ECU tuned to compensate for the additional air and fuel flow, and that can help.

 

Deck plate mod + headers + exhaust will give you power gains. How much? its different for every truck, anywhere from 1 - 20 whp with all 3 installed... throw in some water or water/meth injection and you will get another 10 give or take.

 

Please upload dyno sheets showing gains.


I'll wait

 

here ya go,


http://www.speedysgarage.net/sportrunner/deckplate/projectsportrunner_deckplate.htm


http://www.gadgetonline.com/AirInduction.htm

This too.. 3/4 the way down the page, shows gains from just intake box modification...

 

No.

Pretty much nothing. Nothing you spend will be worth the 5hp you gain. You won't even notice it.

Save up for FAI via Turbo or SC.