Alignment issues after accident

I rear ended a f-250 and took the receiver right in the front end. My truck has been to two body shops and still doesn't drive quite right. The second one said they did a complete alignment. After the accident my truck was pulling to the right. After the "alignment" my truck
Is pulling left. I asked for the measurements but I have not seen them yet.
Just wondering if the damage could
Have bent the frame or caused more than just cosmetic damage.

 

Looking at the way the reinforcement bent I would want the frame rails thoroughly inspected. Having a shop setup and measure on a frame machine would probably be a good idea.
If they don't print out the measurements, they didn't do the work.

 

What Beavis and Gerkyn said! You may have some frame damage and It may just be a matter of getting a Good Alignment done.

 

Update
I have not had much time to look over my truck thoroughly. But I found this. The bracket on the frame that the aluminum bumper bolts to is bent. I looked at my buddy's truck and his is flat.
I have my adjuster coming out to look at it tomorrow.
I know I should have taken it to a more reputable shop but I went with one of the preferred providers.

Anyone know of a good shop in central Vermont?