tire,walker evens/ all pro exp lift, cbi bumper fitment question?

Gents,

I'm sure there is some info about this buried deep in the threads of TW but from my nights and hours of reading I haven't seen this combo. I have a 2014 DCLB TRD Sport.

I am about to install Fox 2.5 CO's with res(I am trying to get 700lb coils), I want to adj them to 3 in of lift because I am going to install the All pro EXPO leafs & walker evens 2.0 res shocks in the rear and anticipate about a 4 in lift there bc I don't have any daily bed weight yet. I am also installing the ready lift UCA's to help with alignment adjustment, not a lot of guys are running the ready lifts but that's what I went with.

I will also be installing the cbi Moab 2.0 with Grill Guard & Headlight Protection (bare metal, any suggestions for paint or bed liner coating?) , will my factory fog lights mount in the bumper light cut outs? no winch yet.

I bought 275/70r18 wheel/tire combo which measure (33.2Hx10.8W) on 18x9 rims with 4.5in back spacing.

I'm hoping that i won't have any metal trimming to do but I do expect to remove the mud flaps and trim some of the inner fender well plastic.

What do you all think? any comments would be appreciated

Thanks for your time