Python 5706 adding power locks help

so installed a python 5706 alarm in my 2014 base model. i also ordered dei 524f door lock actuators. everything went in smoothly except my door locks. they work as i put voltage to them before i sealed them in the doors. my question is how do i wire them in? i have the green and blue wire harness coming off the brain of the alarm.

i used 2 relays.
87 fused 12v
85/86 to fused relay
87a ground
86 alarm lock ouput
85 alarm unlock output
30 to actuators

my question is i wire everything up and throw in my fuse. once everything is powered up my door locks immediately lock or unlock depending on how i wire them to the relay. i hit my lock/unlock button on my remote and nothing happens. not sure what im doing wrong. I NEED HELP lol..getting frustrated

 

crap so I was rethinking the wiring. the 12v shouldnt be a 12v constant. instead if I wire it to my parking lights when I arm the alarm itll send a 12v pulse to the actuators.

but when I turn my headlights on how will this bypass the actuators? does the ignition wire for the alarm disable it?

 

Try posting your question on the12volt.com

 

Go to any audio shop and buy a 451m which is what your trying to do but simplified and you wont have to worry about the relays

 

try

85-lock/unlock trigger
86-12v
87a-ground
30-12v
87-green/blue wire to actuator

then repeat for other wire.
I could be wrong cause im doing it in my head. Rarely do you ever have to do this anymore with a 451M from DEI

 

ok thanks. I tired doing it on the relay but it wasnt working. guy on 12volt told me the relay im using could be giving me problems so I bought relays off a car audio site made for door triggers truck stuff..if that dont work ill buy those 451m's