Mini d2s 3.0 install on '06 taco HELP!!!

hey guys, got mykit a few days ago and began my install today. Retrofit went okay, got my lights sealed well and went to install them in my truck which is where i got in to a little hot water.... my stock light bulb plugs are square 3 prong plugs and the ones that came with my kit are oval 2 prongs... short of cutting off the square plugs and soldering on new ones what the f*** should i do now?! help please!!

 

You may have ordered the wrong harness. Did you order H4 or a different size?

 

I have 9005/9006 harness which was what I thought I needed

 

Also a 35w d2s bulb but it's only single stage? I thought this kit had a high beam?

 

This is the list of what I ordered. Can you tell me what I should have ordered instead?

 

You need the H4 harness and your mini d2s does have high beams. It uses a shield in the projector housing that flips to give you high beams.

 

Thanks for your help.... Here goes round two!!

 

Did you have issue with the projector shank length? Mine seems to short to leave threads for the bulb lock ring.

 

Yeah I ran in to that too. I ended up using rubber o-rings in place of washers to keep the seal and shorten the threads so the lock ring would fix on

 

Got any pictures?

 

I am at work in camp right now but I will be home in a few days and I will post pics when I am home.

 

Hey Zach, sorry for the late reply. I got the kit installed and working after a lot of effort and screwing around... unfortunately I forgot to take a picture of the project threads sticking through the back side of the reflector cup. it sounds like we had different problems however. The threads on my kit projected too far and left my project loose in the housing-to tighten things up and shorten the threads so the lock ring would secure everything, I used rubber o-rings in place of washers to kill off the extra threads. hope that helps but if I am reading thing correct, we had different problems.... this wasn't as easy as all the TW threads made it out to be!

 

HAHA ok yea differing problems. But awesome work on your part fixing yours.

 

Thanks haha took a bit of trial and error. Good luck on your fix too! Chances are if these things have happened to us, we aren't alone