Rear O2 no plug

A while back I pulled my exhaust for my solid axle swap. I could not get the rear 02 sensor out because the bolts were rusted solid. Also there seems to be no plug under the rig, the 02 sensor wires go up through the floor under the carpet under the passenger seat. I searched for how to articles and everyone shows the plug is off a bracket on the t-case but mine has no plug. So I cut the wires to deal with on another day... well that day was today what I ended up doing is butt splicing the wires together with heat shrink butt splices. It seemed to work the only issue I had was there is two black wires so either it does not matter, or I get a 50/50 chance of getting it right.

That is lame if they expect you to pull the carpet to change out the rear 02 sensor. it is a '03 by the way

 

All you gotta do is take the door sill trim off and reach under the carpet