fox 2.0 rear shock 0-1" lift/ toy tech 2" spring pack?

Considering running- FRONT- Fox 2.0 coil over 0-2" adjust. REAR- Fox 2.0 non-resi- 0-1" spec. with toy tech/boss 2" leaf packs. Is this compatible in terms of rear shock?? Fox rear shock specs -model # 980-24-670 extended length 21.95 col. length 13.85 travel 8.1.

 

Man I am wondering about the same thing. I put a 4" Rough Country lift on an it consist of 2" blocks in rear. Shocks that came with it are crap already busted one. Just picked up a set of Fox 2.0 an not sure of part number but length match yours. Plan on putting them on this week. I was pulling measurements an I think it will be fine but won't know for sure until they are installed

 

You should most likely get shocks that are compatible with 1-2 inches of rear lift.

 

They should work. I'm running the 2.0 foxes on the front right now and I'm putting a shock meant for 3-4 inches of lift on a 2.5 rear lift. Im sure they'll work but I'm no professional others will chime in hopefully

 

Overall length is same as original bills that came on it but the lift came with an adapter so you can use eye or loop end instead on a stud end and that bracket is 1.5" from top to center so it. So it could be a 1/4 short both ways... I measured length between bump stop an frame an I think it will have enough travel. However is some one knows for sure stop me now!

 

For what it's worth I installed my 2.0 fox shocks an they work great. Was very impressed with ride quality!