Another annoying question, But please give me input

PRO COMP 51
Wheel Size: 16x8
Bolt Pattern: 6 on 5.5
Backspace: 4
Finish: Black

OR

Wheel Size: 16x8
Bolt Pattern: 6 on 5.5
Backspace: 4.25
Finish: Black
Would/how far would my tires stick out?
Does anyone have any word on these rims? good or bad, decided to go with a steel wheel because i hear there better protection. Thanks would love you input

 

also what about rubbing on break caliber???

 

Hey...

Would/how far would my tires stick out?

PRO COMP 51
Wheel Size: 16x8
Bolt Pattern: 6 on 5.5
Backspace: 4
Finish: Black

Would stick out about 1/2" inch, or more beyond the fender flare...

OR

Wheel Size: 16x8
Bolt Pattern: 6 on 5.5
Backspace: 4.25
Finish: Black

Would stick out about 1/4" inch or more beyond the fender flare...

The standard here is 4.5 backspace.

Does anyone have any word on these rims?

No, I am looking into getting a set them myself...

good or bad, decided to go with a steel wheel because i hear there better protection.

Yes, but in an emergency, a steel wheel can sometimes be repaired
( bent back into position with a sledge hammer), where as an aluminum alloy wheel will either crack or break.

All depends on the type of off roading you will do. However, the Alloy
Wheels are a little better with salted roads.


Links to backspace wheel info is @

http://www.tacomaworld.com/forum/wheels-tires/102992-wheel-backspacing-offset-info.html#post2286749

Wheels as a general tip is @

http://www.tacomaworld.com/forum/wheels-tires/102992-wheel-backspacing-offset-info.html

 

Thank you for all the info! and also im worried about the break caliber rubbing

 

Ok thanks man. Have you ever had any problems with your spacers? and where did you get them from