Keyless Entry Install...Need input

Going to put a keyless entry setup into the truck. It already has power windows and locks. I have done some looking and I think I have a few things figured out,but need your help on the others.

12v Constant- White >>>>>>>> H1/1
Ignition 12v- Black/Red >>>>>>>> H1/15
Parking light-Green >>>>>>>> H1/10
Door Lock- Gray >>>>>>>>
Door Unlock- Purple >>>>>>>>
200mA second door unlock (H1/2) >>>>>>>> ?????
Door trigger- Green >>>>>>>> ?????
Dome Light Supervision >>>>>>>> ????? ( relay?)

Here's the one I'm installing.

http://www.directeddealers.com/manuals/IG/Avital/N2101L_2009-01_web.pdf

 

Figured it out finally.

 

Would be cool if you did a write up on this!!

 

Glad you figured it out. For future reference and anyone else researching this stuff, ModifiedLife.com is a good source for info on keyless entry, alarms, remote starts, and stereos. If they don't have the wiring diagram you're looking for, you can request it. Its somewhat community driven so they might not have everything, but for Tacomas, I think they have it all covered.

I'm not familiar with 1st gens, but I wouldn't think you'd need a relay for the dome light supervision wire. Did you end up needing one?

 

No relay is needed for dome light supervision. The keyless
system should be here in a few days. I'll let you guys know how it goes.